Description

Locking Clamping Pins Are Similar To Standard Clamping Pins, Except That The Pin Body Is Positively Retained In A Locking Bushing. In Fully Retracted Position, The Bushing’s Spring Clip Snaps Into The Pin’s Radial Groove. This Holds The Pin Fully Retracted By Spring Force And Positively Prevents Removal. Spring Pressure Also Holds The Pin In Intermediate Extended Positions, An Advantage Especially If The Fixture Is Turned Upside Down.These Threaded Alignment Pins Can Be Used For Locating And Clamping, Or For Clamping Only, Depending On Extended Screw Length. The Upper Bushing Is Furnished Separate From The Pin, And Must Be Welded In Place At The Proper Length To Suit The Application. Available In Thread Sizes From 1/4-20 To 1/2-13 (M6 To M12 In Metric). Made In Usa.The Complete Assemblies Listed Below Include A Locking Clamping Pin, Locking-Pin Bushing, And Lockscrew. Choice Of Standard Or Long Bushing In Most Sizes, For Installation In Thinner Or Thicker Plates. Locking-Pin Bushings Are Designed To Press Fit In A Standard Reamed Hole, And Can Be Further Secured With The Included Lockscrew To Positively Hold The Bushing In Place.